Plane crash map Locate crash sites, wreckage and more

N57194 accident description

Arizona map... Arizona list
Crash location 32.455000°N, 111.303889°W
Nearest city Avra Valley, AZ
32.437848°N, 111.315385°W
1.4 miles away
Tail number N57194
Accident date 16 Mar 2012
Aircraft type Raven Industries Inc S-66A
Additional details: None

NTSB Factual Report

On March 16, 2012, about 0800 mountain standard time, a Raven Industries, Inc., S-66A balloon, N57194, was substantially damaged when its envelope contacted electrical transmission lines during landing near Avra Valley, Arizona. The commercial pilot and two passengers received minor injuries, and the other six passengers were not injured. The balloon was registered to an individual, and doing business as Southern Arizona Balloon Excursions, under the provisions of 14 Code of Federal Regulations Part 91. A flight plan had not been filed for the local area sightseeing flight, which had originated from Marana, Arizona, about 0630. Visual meteorological conditions prevailed at the time of the accident.

The pilot reported that the balloon was traveling west at a speed of 5 to 7 knots towards a road oriented north-south with a power line running along the east side of the road. Beyond the power line and road was a large area of open desert where the pilot planned to land. When the balloon was about 100 yards from the lines at an altitude of about 300 feet above ground level (agl), he began setting the balloon up for landing by “cracking open the vent-top of the envelope to set up a “heavy” condition for landing.” The pilot operated one of the two burners to compensate for the loss of lift from the partly open top; however, the balloon began a slow descent instead of maintaining altitude, and the descent rate seemed to accelerate. In response, the pilot operated both burners and looked up at the top of the balloon, which he found was “over a third open instead of the expected 2-3 foot opening.” Realizing that the balloon’s glide path would now result in the basket impacting the upper wire of the power line, he decided to fully open the top of the balloon and land short of the power line. The balloon descended and impacted the power line wires with the basket suspension cables contacting more than one wire resulting in electrical arcing. Pieces of burning balloon envelope material rained down into the basket. The envelope folded over the wires, and the basket came to rest on the ground. Three suspension cables were separated and several envelope panels were damaged.

In the section of the National Transportation Safety Board Pilot/Operator Aircraft Accident Report titled “Recommendation (How could this accident/incident have been prevented?),” the pilot stated, “when operating LTA [lighter than air] aircraft initiate set-up for landing sequence only after crossing last obstacle prior to landing field/area.”

NTSB Probable Cause

The pilot's improper decision to partially open the balloon's vent before clearing a power line while landing, which resulted in the balloon descending too soon and contacting the power line.

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.