Plane crash map Locate crash sites, wreckage and more

N1735S accident description

Iowa map... Iowa list
Crash location 41.268611°N, 91.687500°W
Reported location is a long distance from the NTSB's reported nearest city. This often means that the location has a typo, or is incorrect.
Nearest city Washington, IA
43.119141°N, 91.907663°W
128.4 miles away
Tail number N1735S
Accident date 03 Aug 2011
Aircraft type Aero Commander S2R
Additional details: None

NTSB Factual Report

On August 3, 2011, about 1743 central daylight time, an Aero Commander S2R, N1735S, sustained substantial damage during a forced landing following a loss of engine power near Washington, Iowa. The pilot was not injured. The airplane sustained damage to both wings, the fuselage, and the engine. The aircraft was registered to and operated by Cat Aviation, Inc, of Walnut Ridge, Arkansas under the provisions of 14 Code of Federal Regulations Part 137 as an aerial application flight. Visual meteorological conditions prevailed for the flight, which was not operated on a flight plan. The local flight was originating from the Washington Municipal Airport (AWG), Washington, Iowa, when the accident occurred.

The pilot reported that the airplane's engine stopped producing power during climb out after takeoff. The airplane impacted terrain as the pilot was attempting to avoid a house during the forced landing.

According to maintenance records, the most recent maintenance performed on the airplane was an annual inspection on January 17, 2011.

A postaccident examination of the airplane confirmed crankshaft and accessory system continuity. The magnetos and fuel system could not be tested due to impact damage. No preimpact anomalies were noted during the examination that would explain the loss of engine power.

NTSB Probable Cause

The loss of engine power for reasons that could not be determined because postaccident examination of the airframe and engine did not reveal any anomalies that would have precluded normal operation.

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.