NTSB Factual Report

After a 1 hour local flight where he explored the airplane's stall characteristics, the student pilot/owner of the experimental light sport airplane returned to his home airport to practice touch-and-go landings. The pilot "bounced" the airplane during the final landing attempt, and while recovering applied full power to the engine for a go around. The pilot stated that the airplane then banked to the right as a result of the counterclockwise rotating-engine's "p factor effect," and began heading toward a hangar located off the right side of the runway. Due to the airplane's low altitude and airspeed, the pilot elected to continue the right turn to avoid colliding with the hangar, and once clear of it, tried to climb the airplane to clear an approaching tree line. The pilot was unsuccessful in this attempt and the airplane's right wing struck one of the trees. The airplane then impacted the ground, resulting in substantial damage to the airframe and seriously injuring the pilot.

The pilot reported that there were no mechanical malfunctions or failures of the airplane or its engine that would have precluded normal operation. He further attributed the loss of control during the go around attempt to his unfamiliarity with the flight characteristics of the counter clockwise rotation of the airplane's two-stroke engine, and his lack of flight experience in experimental light sport airplanes.

NTSB Probable Cause

The student pilot's improper recovery from a bounced landing and his subsequent failure to maintain clearance from trees during an attempted go-around.