| Crash location | 40.153889°N, 83.274445°W |
| Nearest city | Plain City, OH
40.107562°N, 83.267416°W 3.2 miles away |
| Tail number | N500PY |
|---|---|
| Accident date | 04 Sep 2016 |
| Aircraft type | Stanton DR-1 |
| Additional details: | None |
On September 4, 2016, about 1940 eastern daylight time, a Stanton DR-1, an amateur-built replica of a Fokker Triplane, N500PY, was substantially damage when the engine lost power and collided with objects and terrain near Plain City, Ohio. The pilot was seriously injured. There were no ground injuries. The airplane was registered to and operated by the pilot under Title 14 Code of Federal Regulations Part 91 as a personal flight. Visual meteorological conditions prevailed, and no flight plan had been filed.
The pilot had been building the airplane for several years. For several months, he been conducting taxi tests in preparation for its maiden flight. He told a Federal Aviation Administration (FAA) inspector that the airplane inadvertently became airborne during his last high-speed taxi test.
Witnesses saw the airplane in level flight about 200 feet above ground level and headed towards a tree line when the engine lost power. The airplane abruptly nosed straight down, struck a backyard playground set and hickory trees, and impacted the ground.
FAA inspectors said the airplane came to rest upright about five feet from the initial impact crater and about one-half mile from the departure end of the pilot's private runway. There was a slight fuel leak but no fire. The inspectors were unable to determine why the engine lost power. The pilot did not respond to inquiries.
A loss of engine power for reasons that could not be determined based on the available information.