Plane crash map Locate crash sites, wreckage and more

N97075 accident description

Tennessee map... Tennessee list
Crash location 35.593055°N, 88.909444°W
Nearest city Jackson, TN
35.614517°N, 88.813947°W
5.6 miles away
Tail number N97075
Accident date 03 Feb 2010
Aircraft type Cessna 172
Additional details: None

NTSB Factual Report

On February 3, 2010, at 1348 central standard time, a Cessna 172P, N97075, sustained substantial damage when it collided with a snow bank during a takeoff attempt at McKellar-Sipes Regional Airport (MKL) Jackson, Tennessee. The certificated student pilot was not injured. Visual meteorological conditions prevailed and a visual flight rules flight plan was filed for the instructional flight. The airplane was registered to and operated by the Civil Air Patrol under the provisions of 14 Code of Federal Regulations Part 91. The flight originated at Savannah-Hardin County Airport (SNH), Savannah, Tennessee, at 1245.

According to the student pilot, she landed on runway 2 at MKL, taxied back and took off with closed traffic. She landed again on runway 2, with the winds being from 320-degrees at 3 knots. She stated that during the accident takeoff with full power, the airplane veered to the left. She added more right rudder to compensate for the left drift, but felt a jerk, and the airplane continued to turn left. The airplane impacted a snow bank on the left side of the runway, at which time the nose landing gear collapsed and the propeller made contact with the runway surface.

Examination of the airplane by a Federal Aviation Administration (FAA) inspector confirmed that the airplane had impacted a snow bank off the left side of the runway, collapsing the nose landing gear and damaging the firewall. Further examination of the nose gear found the right “bearing-rod end” broken off the “arm assembly-nose gear steering rod.” The bearing-rod end and the arm assembly were sent to the NTSB’s Materials Laboratory for further examination.

The examination of the bearing-rod end and the arm assembly-nose gear steering rod through magnified optical inspections revealed deformation and fracture surface features consistent with bending overstress separations in both components. No indications of preexisting conditions, such as fatigue or corrosion, were noted.

NTSB Probable Cause

The student pilot's loss of directional control during the takeoff roll, which resulted in a collision with a snow bank.

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.