Plane crash map Locate crash sites, wreckage and more

N6752Q accident description

Texas map... Texas list
Crash location Unknown
Nearest city Ganado, TX
29.040536°N, 96.513583°W
Tail number N6752Q
Accident date 02 Jun 1993
Aircraft type Grumman G-164A
Additional details: None

NTSB Factual Report

On June 2, 1993, at approximately 1700 central daylight time, a Grumman G 164A airplane, N6752Q, was destroyed upon impact with power lines and terrain while maneuvering near Ganado, Texas. The commercial pilot, sole occupant of the airplane, was fatally injured. Visual meteorological conditions prevailed for the aerial application flight. The airplane was owned and operated by Arenosa Flying service of Edna, Texas.

According to the operator, the pilot was assigned to spray fertilizer on rice fields about two and a half miles north of Ganado, Texas, off Farm to Market Road 710 in Jackson County. The collision with the wires occurred as the airplane was completing the last pass on the last flight of the day.

According to witnesses at the accident site, the airplane was spraying on a field traversed from east to west by power lines suspended between towers. The airplane was observed striking the power lines and impacting the flooded rice field in a nose low attitude, coming to rest inverted.

An autopsy and toxicology tests were ordered and performed. The autopsy was performed by Roberto J. Bayardo, M.D, Chief Medical Examiner for Travis County on June 3, 1993. Toxicological reports submitted by the Civil Aeromedical Institute were negative.

The airplane was released to the owner at the accident site on June 4, 1993.

NTSB Probable Cause

THE PILOT'S FAILURE TO MAINTAIN CLEARANCE WITH THE POWER LINES

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.