Plane crash map Locate crash sites, wreckage and more

N81519 accident description

Texas map... Texas list
Crash location 32.007778°N, 97.017223°W
Reported location is a long distance from the NTSB's reported nearest city. This often means that the location has a typo, or is incorrect.
Nearest city Hurst, TX
32.823462°N, 97.170568°W
57.1 miles away
Tail number N81519
Accident date 07 May 2003
Aircraft type Bell 206B
Additional details: None

NTSB Factual Report

On May 7, 2003, at 1025 central daylight time, a Bell 206B helicopter, N81519, was substantially damaged during a hard landing at the Bell Helicopter Auxiliary Heliport (Flight Training Strip), Hurst, Texas. The helicopter was registered to Textron Financial Corporation, of Wichita, Kansas, and was operated by Bell Helicopter Textron, of Fort Worth, Texas. The flight instructor and the pilot receiving instruction (who held a commercial-rotorcraft pilot certificate that was issued in Israel) were not injured. Visual meteorological conditions prevailed, and a flight plan was not filed for the 14 Code of Federal Regulations Part 91 instructional flight. The local flight originated from the Bell Helicopter Hurst Heliport, Hurst, Texas, at 0955.

According to both pilots, the flight instructor demonstrated an out of ground effect (OGE) autorotation from 500 feet agl and 0 knots. The pilot receiving instruction was then requested to perform an OGE autorotation from 500 feet agl and 0 knots. During the pilot's second OGE autorotation, he "rolled the throttle off and moved the cyclic slightly forward." The airspeed did not climb above 45 knots and an "excessive rate of descent" was encountered. The pilot used almost no cyclic to flare the helicopter; however, he pulled "all collective available" prior to touchdown. The helicopter touched down hard wrinkling the tailboom.

NTSB Probable Cause

The improper flare by the pilot receiving instruction, which resulted in the hard landing. A contributing factor was the flight instructor's inadequate supervision.

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.