Plane crash map Locate crash sites, wreckage and more

N353RA accident description

Ohio map... Ohio list
Crash location 41.003056°N, 81.756389°W
Nearest city Wadsworth, OH
41.029221°N, 81.729018°W
2.3 miles away
Tail number N353RA
Accident date 11 Jan 2018
Aircraft type S.O.C.A.T.A. MS893E
Additional details: None

NTSB Factual Report

On January 11, 2018, about 1130 eastern standard time, a S.O.C.A.T.A. MS893E airplane, N353RA, was substantially damaged during a forced landing at Wadsworth Municipal Airport (3G3), Wadsworth, Ohio. The private pilot was not injured. The airplane was registered to and operated by the pilot under the provisions of Title 14 Code of Federal Regulations Part 91 as a ferry flight. Day visual meteorological conditions prevailed for the flight, which departed without a flight plan from Reader-Botsford Airport (67D), Wellington, Ohio, about 1120.

The pilot stated that the purpose of the flight was to ferry the airplane, which had an expired annual inspection, to a new hangar. During the approach to 3G3, the pilot noticed a loss of engine power. Following unsuccessful attempts to restore engine power, the pilot executed a forced landing, during which the airplane impacted trees and damaged both wings.

Examination of the airplane at the accident site revealed the carburetor heat control was in the off position. The left fuel tank contained nine gallons of fuel and the right fuel tank contained seven gallons of fuel. The fuel contained no contaminants and no obstructions were found in the fuel lines. The engine was rotated by hand utilizing the propeller and compression was observed at all cylinders, with normal valve train and crankshaft continuity. Both magnetos were rotated by hand and produced spark at all leads. The engine fuel pump was actuated and exhibited normal suction and compression of fuel. The carburetor filter was free of contaminants and no anomalies were noted with the carburetor. Examination of the engine and fuel system revealed no preimpact anomalies that would have precluded operation of the engine.

The pilot stated that although his normal habit pattern was to activate the carburetor heat control while on downwind, this action may not have occurred on the accident flight and he thought the power loss might have been caused by carburetor icing. He had not flown the airplane for more than a year.

The recorded temperature and dew point data from a nearby weather station were plotted on a carburetor icing chart. The charted data showed that the weather was conducive to serious icing at descent power near the time of the engine power loss.

NTSB Probable Cause

The pilot’s failure to apply carburetor heat during the approach, which resulted in a loss of engine power due to carburetor icing.

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.